This compact FIBARO Double Smart Module can remotely turn on and off electrical devices or circuits with ease. You can control two devices or circuits with this module, either through the Z-Wave network or by using buttons connected directly to them. Its small size also makes it easy to install in the housing of other devices.
*Note: Certified electricians in Australia and New Zealand must carry out the installation. Ensure an electrical compliance certificate is provided.
| Power supply | 100-240V~ 50/60Hz or 24-30V DC |
| Rated load current | 6A per one channel 9.5A total |
| Compatible load types | resistive or incandescent only |
| Active element | micro-gap relay μ |
| Maximum length of wires | 3 meters |
| Recommended wire cross-section area | 0.2–2.0mm2 (24–14 AWG) (depending on load current) |
| Operating temperature | 0–35°C |
| Ambient humidity | 0–95% RH without condensation |
| Radio protocol | Z-Wave (500 series chip) |
| Radio frequency band | 868.0–868.6MHz; 869.7–870.0MHz |
| Max. transmitting power | +5dBm |
| Range | up to 50m outdoors up to 40m indoors (depending on terrain and building structure |
| Dimensions (Height x Width x Depth) |
42.5 x 38.25 x 20.3 mm |
| Classification of installation and use | Automatic electrical control for use in equipment for household or similar use |
| Mode of operation | Type 1.B Action |
| Pollution degree | 2 |
| Software class | Class A |
| Compliance with EU directives | 2011/65/EU 2015/863 2014/53/EU |
Contact us about this product
Please contact me about Fibaro Double Smart Module